Hydraulic Operating Table
3001D Hydraulic Operation Table
Hydraulic operation table double layer
The shield material is high-grade stainless steel.
Technical parameters:
Overall length of the table: 2100 mm;
width of the table: 500 mm;
height adjustment of the table: 750-1000mm;
forward tilt: ≥25°;
backward tilt: ≥20°;
left and right tilt: ≥18°;
longitudinal translate: ≥ 300 ㎜;
Back panel/folding down: ≥60°/≥15°;
Head panel/folding down: ≥45°/≥90°;
Lumbar adjustment: ≥120 ㎜;
Leg panel folding: ≥90°;
Legs Board Abduction: ≥90°;
Configuration list:
1 anesthesia shield; 1 shoulder support; 1 arm support; 1 foot board; 1 support frame; 1 leg support; 1 mattress set
Technical parameters:
Overall length of the table: 2100 mm;
width of the table: 500 mm;
height adjustment of the table: 750-1000mm;
forward tilt: ≥25°;
backward tilt: ≥20°;
left and right tilt: ≥18°;
longitudinal translate: ≥ 300 ㎜;
Back panel/folding down: ≥60°/≥15°;
Head panel/folding down: ≥45°/≥90°;
Lumbar adjustment: ≥120 ㎜;
Leg panel folding: ≥90°;
Legs Board Abduction: ≥90°;
Configuration list:
1 anesthesia shield; 1 shoulder support; 1 arm support; 1 foot board; 1 support frame; 1 leg support; 1 mattress set
Hydraulic Operating Table
L I S
Product Feature
economical type
01
hydraulic control
02
available for any examinations
03
one year warranty
04
ISO CE FDA
05
Easy to clean surface
06
Product Introduction
This product is used for head, neck, thoracic-abdominal cavity, perineum and limbs and other surgical operations in hospital operating rooms, as well as obstetrics and gynecology, ophthalmology, ENT, orthopedics and other operations. The oil pump is used for hydraulic lifting, and the posture adjustment required during the operation is operated on both sides of the table.
The main features of this product are as follows:
1. It adopts manual screw drive to drive the table to move longitudinally, and can be used with C-arm to facilitate X-ray diagnosis and filming;
2. The angle adjustment of the back plate and the leg plate is assisted by gas spring servo Movement, gravity compensation, light and flexible operation;
3. The leg plate can be disassembled, abducted, and folded down, which is convenient for urological surgery;
4. The shield material is high-grade stainless steel.
The main features of this product are as follows:
1. It adopts manual screw drive to drive the table to move longitudinally, and can be used with C-arm to facilitate X-ray diagnosis and filming;
2. The angle adjustment of the back plate and the leg plate is assisted by gas spring servo Movement, gravity compensation, light and flexible operation;
3. The leg plate can be disassembled, abducted, and folded down, which is convenient for urological surgery;
4. The shield material is high-grade stainless steel.
